Application:
Hognjin Programmable Walk - In Environmental Temperature Humidity
Stability Climatic Test Chamber is perfectly meet the large size
test application that require high temperature and high humidity.
The chamber is constructed with structural steel, the steady
structure able to test the large components and products. Various
optional function available for different test standard and
requirement.
Must meet the requirements of international standards (IEC, JIS,
GB, MIL...) to achieve international measurement procedure
consistency (including test procedures, conditions, methods)
Features:
1. Energy efficient technology, more stable, durable longevity.
2. Steel structure, Stainless steel interior cabinet, easy to
clean.
3. Test data logging output with USB memory stick.
4. RS485 and Ethernet remote control.
5. Alarm notification via phone available.
6. Programmable
Test limit
This test equipment is suitable for:
Electrical, electronic products, components, components and
materials are stored in high and low temperature environments
Adaptability tests for storage, transportation and use.
This test equipment is prohibited:
Testing or storage of flammable, explosive, volatile materials
Testing or storage of corrosive substance samples
Testing or storage of biological samples
Testing or storage of samples of strong electromagnetic emission
sources
Volume, size and weight
| Size(cm) | BT-6 | BT-8 | BT-12 | BT-16 | BT-20 | BT-24 | BT-28 |
| Inner box (D*H*W) | 200*200*150 | 200*200*200 | 200*200*300 | 200*200*400 | 200*200*500 | 200*200*600 | 200*200*700 |
| Outer box (D*H*W) | 220*250*270 | 220*250*320 | 220*250*420 | 220*250*520 | 220*250*620 | 220*250*720 | 220*250*720 |
| Performance | |
| Test environmental conditions | The ambient temperature is +25 ° C, the relative humidity is ≤ 85%,
and there is no sample in the test chamber. |
| High temperature range | 85°C(150°C) |
| Low temperature range | A: +25 °C B:0°C C:-20°C :-40°C E:-60°C F:-70°C) |
| Humidity range | 30-80%(Customize 10% - 98%) |
| Temperature fluctuation | ±0.5°C |
| Temperature distribution accuracy | ±2.0°C |
| Humidity fluctuation | ±5% R.H. (damp heat only) |
| Humidity distribution accuracy | ±5.0%. (damp heat only) |
| Load situation | The test space is no more than three-quarters of the total space
and there is no heat. |
| testing method | GB/T 5170.2-1996 temperature test equipment |
GB/T 5170.5-1996 Damp heat test equipment (damp heat type only)
|
Structure
1.Thermal insulation structure
Outer wall material: high quality stainless steel 304 / cold rolled
steel plate painting
Inner wall material: high quality stainless steel 304
Box insulation material: flame retardant fireproof rigid
polyurethane foam
Door insulation material: flame retardant fireproof rigid
polyurethane foam.
2.Air conditioning channel
Centrifugal fan, return air mode: air blow on equipment, return air
Heater, evaporator, water supply and drain, temperature sensor.
3.Test box standard configuration
Window 250x320x40mm 3-layer vacuum layer
Explosive handle
Door hinge: SUS #304
Box light PL light 11W
Lead hole: φ50mm 1
4.Door
Single door, left open, handle on the right hand side. With
observation window 250*320 mm, lighting,
Window frame/door frame anti-condensation electric heating device
5. Control panel Controller display, over temperature protection
setter
6. Mechanical room Refrigeration unit, water tray, drain hole
7. Distribution control cabinet, distribution board, exhaust fan
8. Heater Heating system: finned heat pipe type stainless steel
electric heater heating air circulation mode
9. Humidifier Boiler type humidification system, circulating
through the air duct system.
10. Power cable hole and drain hole are located on the back of the
cabinet
Cooling System
1.Condenser Water-cooled shell tube heat exchanger.
2. Expansion system Refrigeration system (capillary) for capacity
control.
3. Evaporation condenser Stainless steel brazed plate heat
exchanger.
4. Refrigerator control mode The controller of the control system
automatically adjusts the operating conditions of the refrigerator
according to the test conditions.
Evaporate the pressure regulating valve.
Compressor return air cooling circuit.
5. Temperature and humidity controller
It adopts the micro-computer color LCD display touch screen,
Chinese wide angle of view, high contrast function temperature and
humidity can be programmed at the same time, with 100 groups of
programs 1000 segments of memory, each segment 530Hour59Min, can be
arbitrarily divided Settings, and With multiple sets of PID control
functions.
6. Controller Specifications
Accuracy: temperature ±0.1 °C+1 digit, humidity ±1% R.H+1digit
Resolution: temperature ± 0.01 ° C, humidity ± 0.1% R. H.
Temperature slope: 0.1 ~ 9.9 can be set.
With upper and lower limit standby and alarm function.
Temperature and humidity input signal dry and wet ball PT100x2.
7 sets of P.I.D control parameter settings, P.I.D automatic
calculation.
Dry and wet balls are automatically corrected.
Safety device
Cooling System
Compressor overheating
Compressor overcurrent
Compressor overpressure
Condensing fan overheating
Compressor oil pressure protection
Installation site
The floor is flat and well ventilated
No strong vibration around the device
No strong electromagnetic field around the device
No flammable, explosive, corrosive substances and dust around the
equipment
Appropriate use and maintenance space is left around the equipment,
as shown below:
A: not less than 10cm
B: not less than 60cm
C: not less than 60cm
D: not less than 120cm
Tap water
(only for wet heat equipment with water purifier)
Flow rate ≥200kg/h,
The pressure is 0.1 MPa to 0.25 MPa.
Tap water meets the sanitary standards for drinking water in GB
5749-1985.
Note: DN15 male connector for pure water machine.
Company instrotruction
BOTO GROUP Ltd. is a private enterprise integrating r&d,
production, OEM and sales of scientific and technological equipment
manufacturing. Proficient in the production, development and
upgrading of various non-standard instruments and automatic
instruments. The factory covers an area of 26,666 square meters,
headquartered in Shanghai, has several offices in China, the
factory annual output of about 2000 sets of equipment. Since the
establishment of the company, the company is committed to providing
customers with quality products and services, and has been praised
by customers.
In the domestic market, we have many end customers, third-party
testing institutions, research institutes, leading enterprises in
different industries, and some agents. For the overseas market, we
hope to find more general agents, distributors and importers to
cooperate together.
The factory has the ability to calibrate, and the customer can also
designate a third party organization to calibrate and issue a
calibration report.
Some foreign customers have equipment leasing business, we only
provide new equipment sales, no leasing business.
