Japan imported LCD touchscreen controller Environmental Test
Chambers PCB Test Chamber
Product Description:
1 Test physical changes of IC,PCB, ceramic semiconductors and other
high polymer materials.
2 High and low temperature liquid tanks use forced mixing
convection way.
3 Automatically move testing samples from up to down or left to
right to preheating,precooling.
4 Use Garden D02TS in hot and cold chambers to reduce the cost.
5 Japan imported LCD touch screen controller.
6 Suitable for water cooling and air cooling.
7 Optional accessories: Temp. recorder and solution.
Liquid type thermal shock chamber specification
| Model | BT-O-01 | BT-O-02 |
| Method | Immersion in liquid bath by movement of a sample basket rack |
| Internal Dim.W×H×D(MM) | 200×350×300×2Bath | 260×350×450×2Bath |
| Temperature rise time (high temperature bath) | Room temperature to +150°C within 120 minutes |
| Temperature rise time (low tempreature bath) | Room temperature to -65°C within 120 minutes |
| Precool/Preheat Temp.Range | -75.00°C~00.00°C/+600.00°C~160.00°C |
| Shocking Temp.Tange | -65.00°C~00.00°C/+600.00°C~150.00°C |
| Testing Time | 5min | 5min |
| Movement Time | Approx.10 seconds |
| Resolution | 0.1°C / 1 min |
| Control Constancy | ±0.2°C |
| Sample basket Kim.W×H×D( mm ) | 10×18×20 | 16×18×35 |
| Sample Weight | 1C 2Kg | 1C 5kg |
| Controller | 1P |
| Power Source.[K.W.] | AC 1Ψ 220V;3Ψ 380V 60/50Hz |
Application
Physical change test of electronic chip IC, PCB, semiconductor
ceramic and polymer materials. The high and low temperature liquid
tank adopts the forced stirring convection method. The
full-automatic up, down, left, and right displacement mechanism is
used to move the sample basket to the preheating and pre-cooling
troughs, with a round-trip impact. Hot kerosene uses a single same
liquid GARDEN D02TS in the high and low temperature tank, reducing
the cost of frequent liquid replacement. It adopts the original
large LCD Chinese/English display temperature programmable
microcomputer controller.
A. Description:
Automatic Steam Aging Testing Chamber is used to test and determine
the parameters, performance
of electrical, electronics, other products and materials for high
temperature, low temperature, or the
temperature of the thermostat test environmental changes.And also
is used in electronic connector,
semiconductor IC, transistors, diodes, LCD LCD, chip resistance
capacitance and components industry
electronic components metal pin wetting resistance test before the
aging accelerated life time test;
Semiconductor and passive components, parts pin oxidation test.
China technical high Accuracy Temperature environment climatic test
chamber is available as standard products in a variety of sizes to
suit your needs. Our environmental test chambers are often used for
steady-state stability testing, basic temperature cycling and
accelerated stress testing. In keeping with the needs of today's
lab, we designed these temperature and humidity test chambers to
have a compact exterior that maximizes the interior workspace.
Lowest temperature: -20 or -70°C (-4 or -100°F)
Highest temperature: 150°C (302°F)
Humidity range: 10 to 98% RH
Chamber size: 5.3 cubic feet
Touch-screen Watlow F4T programmer with Ethernet access
B. Specification:
C. Feature:
1· Controlled by microcomputer digital LED.
2· Having time planning function.
3· Having safety device, including multi over-temperature
protection and power off when out of water.
4· Testing high temperature/high humidity to spare pares,
components.
5· Digital electronic indicators + S.S.R with PID automatic
calculation capability.
6· Have time planning function, the maximum setting is 9990
minutes.
