Light Bulb UVB Lamp 8PCS UV Aging Test Chamber UV Simulation
Environment Test Machine
Product description
Use
Mainly used in national defense industry, aviation
industry'automobile parts, electronic parts, plastics industry,
food industry and other related product development, straightening
management engineering test specifications.
Features
1. The heating method is tank type heating, fast temperature rise
and uniform temperature distribution;
2. The drainage system uses vortex type and U type accumulation
device to drain water, which is convenient for users to clean;
3. The black aluminum plate is used to connect the temperature
sensor, and the blackboard temperature meter is used to control the
heating, so the temperature is more stable;
4. Radiometer probe is fixed, no need to load and unload each time;
5. Special ultraviolet radiation meter for high precision display
and measurement of radiation amount; Radiation degree is not
greater than 50W/m2;
6. Light and condensation can be controlled independently can be
alternately cycle control, time can be set in 1000 hours.
Item | Specification |
Chamber dimension (W*D*H) | 1300*500*1460mm |
Chamber material | SUS#304 stainless steel |
Temperature range | RT to 70℃ |
Temperature fluctuation | ≤±1.0℃ |
Temperature uniformity | 3℃ |
Humidity range: | ≥75%RH |
Controller | Programmable controller, LCD touch screen |
Control mode | Balance temperature humidity control (BTHC) |
Test cycle setting | Exposure, condensation and water spray test cycle is programmable |
Water spray cycle | Spray 18mins in every 120mins / spray 12mins in every 60mins |
Water usage | 8L/day |
Distance from sample to lamp | 55±2mm |
Centre distance between lamps | 65~70mm |
Irradiance range | 0.45~0.90W/m2 |
Lamp power | 40W/Piece |
UV lamps | Imported Atlas UV-A: 315-400nm (8pcs, 1600h lifetime) |
Testing time | 0~999H, adjustable |
Specimen Size | 75×290mm (24pcs) / 75x150mm (48pcs), maximum thickness 5mm |
Protection system | Overload short circuit protection |
Over temperature protection |
Water lacking protection |
Earth leakage protection |
Auto shut off protection |
Applicable standards
(1) ISO 48-3-2006, Plastics - Methods of exposure to laboratory
light sources - Part 3: Fluorescent UV lamps;
(2) ASTM D4329-2005, Standard Practice for Fluorescent UV Exposure
of Plastics;
(3) ASTM D4587-2005, Standard Practice for Fluorescent
UV-Condensation Exposures of Paint and Related Coatings;
(4) ASTM D5208-2001, Standard Practice for Fluorescent Ultraviolet
(UV) Exposure of Photodegradable Plastics,
(5) ASTM D4799: Standard Practice for Accelerated Weathering Test
Conditions and Procedures for Bituminous Materials (Fluorescent UV,
Water Spray, and Condensation Method)
(6) ISO 4892-1: Plastics - Methods of Exposure to Laboratory Light
Sources - Part 1: General guidance
(7) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light
Sources - Part 3: Fluorescent UV Lamps
(8) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure
(9) IEC 61345: UV Test for Photovaltalic (PV) Modules
FAQ
Q1: How can i get a quotation?
A1: Kindly provide us your details request (inner chamber size,
temperature range, humidity range, power supply, product, etc.),
leave us an inquiry or email and we will response promptly!
Q2: What's your temperature & humidity range?
A1: Our standards temperature range is -70℃~+180℃, 20%~98%RH.
We also can do Ultra low temperature to -190℃ .
Q3: What's your rate of heating & cooling?
A3: Our standards rate is average 3℃/min for heating, 2℃/min for
cooling.
3℃/min,5℃/min,8℃/min,10℃/min,15℃/min linear or non-linear speed is
available for us.
Q4: What's your warranty?
A4: 12 Months (Noted: free spares parts can be offered during
warranty period, exclude consumables and man-made damages),
life-time technical service
ABOUT US
BOTO GROUP LTD.Is a professional manufacturer of environmental test
equipment and test service. Our company was established in 1998,the
plant covers 55,000 square meters and a construction area of 6,800
square meters, existing 160 workers and we can provide operation
video for machines.
The policy the company adheres to:TODAY'S QUALITY IS THE MARKET FOR
TOMORROW.
