Ozone Aging Test Box Lab Instrument GB/T7762-2003 B-CY-120
Environment Test Machine
Ozone content in the atmosphere is very little is the main factor
of rubber cracking, ozone aging box simulation and strengthen ozone
conditions in the atmosphere, study the rule of action of ozone on
rubber, rapid identification and evaluation of rubber anti-ozone
aging performance and anti-ozone agent protective effectiveness of
methods, and then take effective anti-aging measures, in order to
improve the service life of rubber products, reference standard: GB/T7762-2003, GB/T2951.21-2008
How refrigeration works:
The reverse Carro cycle is adopted in the refrigeration cycle,
which consists of two isothermal processes and two adiabatic
processes. The process is as follows: The refrigerant is adiabatic
compressed to a higher pressure by the compressor, and the work is
consumed to increase the exhaust temperature. Then the refrigerant
is heat exchanged by the condenser and other media to the
surrounding media. After the refrigerant through the closure valve
adiabatic expansion work, the refrigerant temperature decreases.
Finally, the refrigerant absorbs heat from the higher temperature
object through the evaporator, so that the temperature of the
cooled object is reduced. The cycle is repeated to cool the
temperature. Refrigeration system design application of energy
regulation technology, a kind of effective treatment can ensure
that the refrigeration unit in the normal operation of the case and
the refrigeration system of energy consumption and cooling capacity
for effective regulation, so that the refrigeration system
operating costs down to a more economic state.
Heating and cooling systems:
Using far infrared nickel alloy high speed heating wire;
Ozone, temperature, humidity, refrigeration completely independent
system;
The output power of temperature control is calculated by
microcomputer to achieve high precision and high efficiency.
Compressor: fully sealed French Taikang 1 set;
Refrigeration mode: air cooling;
Coolant: R404A;
The whole system pipeline is ventilated pressure 48H leak detection
test;
Heating and cooling systems are completely independent;
Inner spiral refrigerant copper pipe;
Slope evaporator;
Filter dryer, refrigerant flow window, repair valve, oil separator,
solenoid valve, liquid storage cylinder are imported original
parts.
product description:
Model | B-CY-120 | B-CY-250 | B-CY-500 | B-CY-1000 |
Internal Dim(DxWxH) | 45x45x60 | 50x60x75 | 70x80x90 | 100x100x100 |
| Temperature range | 0℃-70℃ |
| Humidity range | >65%R·H |
Ozone concentration | 0-200PPm.0-300PPm |
Temperature fluctuation | ±0.5℃ |
test apparatus |
Dynamic and static (optional) |
Sample rack rotation speed |
360 degree rotating sample holder (1 rpm per minute) |
Gas flow rate | 12-16mm/s |
Temperature Controller |
Imported LED digital display P.L. D+5.5, R microcomputer integrated
controller |
Time controller |
Precision hours,minutes,seconds time controller |
Ozone concentration analysis |
Imported concentration analysis regulator 4-20mA outputs,RS232
communication port |
Ozone generator |
Silent discharge tube type |
Security protection |
Leakoge,short circuit,over temperature,motor
overheating.over-current protection |
Our Company:
Packing/Shipping:
Our Services
During the whole business process, we offer Consultative Selling
service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photoes to show the proucts
appearance. Then, confirm the final solution and confirm final
price with customer.
3)Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
4)Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.
