Ozone Aging Test Chamber Lab Instrument GB/T7762-2008 Test Machine
Lab Drying Oven
Description:
Due to the use of medium frequency and high voltage power supply
mode, because the electrode will not produce corona overheating, so
that the ozone concentration is stable, will not decrease with the
working time or gas flow level and ozone concentration. The high frequency surface discharge ceramic corona generator uses
high frequency voltage discharge, and when the temperature in the
discharge area cannot be discharged effectively, the ozone will
decompose due to overheating, so it is appropriate to use it under
high airflow condition
Integrated ozone concentration, temperature and humidity controller
(setting mode is touch button), high integration, good reliability,
LED display, display resolution temperature (0.1℃), humidity
(0.1%RH), ozone concentration (1pphm), PID set value control, easy
to operate
No vulnerable components, maintenance free work, long life. And high frequency along the surface discharge ceramic corona
generator ceramic electrode surface is easy to produce oxidation
attachments, when the surface oxide is too thick, easy to produce
corona block, not timely cleaning, ozone will not be able to
produce.
Sample rack requirements:
1. It is composed of shell, electronic components and ozone
generator.
2. At the required elongation, the fixture is used to fix both ends
of the sample. When contacting with the ozonated air, the length
direction of the sample should be basically parallel to the
direction of the air flow.
3. The fixture should be made of materials (such as aluminum) that
are not easy to decompose ozone.
4, make the sample rotation speed between (20^-25) mm/s, in a
vertical dry air plane, each sample continuously along the same
path.
5. The rotation time of one sample is (8^-12) min. The scanning
area of the sample (the shaded part shown in Figure 2) is at least
40% of the effective area of the test chamber.
6. Sample preparation shall comply with the provisions of GB/T
9865.1. The sample is best cut from the new molded test piece, if
necessary, from the finished product.
7. At least 3 samples should be used for each test condition.
8. The width of the standard strip sample shall be no less than
10mm, and the thickness shall be 2.Omm 0.2mm. The length of the
sample between the two ends of the fixture shall be no less than
40mm before stretching.
Market value:
Ozone aging test chamber, as the name suggests, is a kind of test
equipment to identify the weatherability of products by simulating
or accelerating the aging situation of ozone in the atmosphere to
rubber. So, for ozone aging test box in today's society market situation,
its market value and reflected in where. The market value and application prospect of ozone aging test
chamber are discussed here.
Today, both at home and abroad, the idea of environmental testing
is gaining momentum. In order to meet the growing needs of today's society, people's
research and development of new materials is on the rise. At the
same time, in order to test the weatherability of new materials and
the adaptability of special environment, more and more test
equipment has been put on the stage of scientific development. We are familiar with UV aging test chamber, salt spray test
chamber, high and low temperature test chamber, vibration test
bench, ozone aging test chamber and so on. Today we will talk separately about the market value and
application prospects of ozone testing in terms of gas corrosion.
In 2012, the industrial technology is increasingly developed. In
recent years, the rubber industry has been developed a lot. The
existing subdivision industry is stable and rising, and the new
rubber subdivision industry is developing rapidly. In life, plastic toys, rubber gloves, tape and other products add a
lot of happiness and convenience to our life; Rubber not only provides people with indispensable daily life,
medical and other light industrial rubber products, and to mining,
transportation, construction, machinery, electronics and other
heavy industry and emerging industries to provide a variety of
rubber production equipment or rubber parts, such as: in the
industrial field, rubber in bridge construction shock absorption,
automotive parts sealing, electronic product conductor and so on. However, here is a question: if the quality and performance of so
many rubber products in our life once the problem, will bring
people how much loss will be?
product description:
| Model | B-CY-120 | B-CY-250 | B-CY-500 | B-CY-1000 |
| Internal Dim(DxWxH) | 45x45x60 | 50x60x75 | 70x80x90 | 100x100x100 |
| Temperature range | 0℃-70℃ |
| Humidity range | >65%R·H |
| Ozone concentration | 0-200PPm.0-300PPm |
| Temperature fluctuation | ±0.5℃ |
| test apparatus | Dynamic and static (optional) |
| Sample rack rotation speed | 360 degree rotating sample holder (1 rpm per minute) |
| Gas flow rate | 12-16mm/s |
| Temperature Controller | Imported LED digital display P.L. D+5.5, R microcomputer integrated
controller |
| Time controller | Precision hours,minutes,seconds time controller |
| Ozone concentration analysis | Imported concentration analysis regulator 4-20mA outputs,RS232
communication port |
| Ozone generator | Silent discharge tube type |
| Security protection | Leakoge,short circuit,over temperature,motor
overheating.over-current protection |
Our Company:
Our Services
During the whole business process, we offer Consultative Selling
service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photoes to show the proucts
appearance. Then, confirm the final solution and confirm final
price with customer.
3)Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
4)Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.
