Rapid Temperature Test Chamber Lab Test Machine B-T-1000(A~E)
Product Description
APPLICATIONS
1.To simulate test environment with different temperature and
humidity
2.Cyclic test includes climatic conditions: holding test,
cooling-off test, heating-up test, moistening test and drying test
3.Cable port with flexible silicone plug for cable routing to
provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated
time effect
CHAMBER DESIGN FEATURES
1.High performance and quiet operation (68 dBA)
2.Space-saving designed for flush installation to wall
3.Full thermal break around doorframe
4.One 50mm diameter cable port o left, with flexible silicone plug
5.Accurate wet/dry-bulb humidity measurement system for easy
maintain
Standard:
China Machine Rapid Rate Change Temperature High Low Temperature
Cycle Test Chamber
GB/Bb T2423.2-89 high temperature test method GB2423.1-89 test A:
low temperature test method 6
Ab IEC60068-2-1 low temperature test method GJB150.4-1986 test at
low temperature
EIA - 364-59 test at low temperature IEC60068-2-38 temperature
cycle
IEC60068-2-78 constant temperature IEC60068-2-30 temperature cycle
Characteristics:
1.High and Low temperature chamber test machineUse the high
precision microcomputer touch temperature and humidity controller
with high stability of platinum resistance to temperature and wind
speed in the circulatory system of temperature and humidity test.
2.High and Low temperature chamber test machinecontrol
temperature&humidity well-distributed, precisely and steady.
3.High and Low temperature chamber test machine Completely
independent system separate for testing in high temperature, low
temperature and constant temperature&humidity environment.
Rapid temperature change test chamber refrigeration system and
compressor:
In order to ensure the cooling rate of the test chamber and the
minimum temperature requirements, the test chamber uses a set of
Taikang fully enclosed compressor composed of binary overlapping
air cooling refrigeration system. The overlapping refrigeration
system consists of a high temperature refrigeration cycle and a low
temperature refrigeration cycle, and its connecting vessel is the
evaporative condenser. The evaporative condenser also plays the
role of energy transfer, transferring the heat energy in the
working room through the two-stage refrigeration system to achieve
the purpose of long temperature. Refrigeration system design
application of energy regulation technology, an effective treatment
can ensure that in the normal operation of the refrigeration unit
and the refrigeration system of energy consumption and cooling
capacity for effective regulation, so that the refrigeration system
operating costs and failure rate down to a more economic state.
Manufacturer:
| Model | dry heat | B-T-80(A-E) | B-T-120(A~E) | B-T-225(A~E) | B-T-504(A~E) | B-T-1000(A~E) |
| damp and ho | B-TH-80(A-E) | B-T-120(A~E) | B-T-225(A~E) | B-T-504(A~E) | B-T-1000(A~E) |
| Internal Dim (CM) | 40x50x40 | 45x60x45 | 60x75x50 | 70x90x80 | 100x100x100 |
| External Dim(CM) | 75x203x203 | 75X189X110 | 90X177X130 | 100X180X103 | 130X190X123 |
| Relative Humidity | 20％-98％RH |
Temp Range | -70℃~180℃(100℃) (A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃) |
| heat-up time |
1℃-15℃／min |
| Pull down time | 1℃-15℃／min |
| Temp Fluctudtiont | ±0.5℃ |
| Temp Uniformity | ±1.0℃ |
| Temp&Humi.Deviation | ±1.0℃/±3.0℃RH |
| Interior | SUS#304Stainless steel plate |
| Exterior | Coating or SUS#304Stainless steel plate |
| Power Source | AV:220V/380V 50/60Hz |
| Power(KW) | The technical proposal shall prevail |
Our company:
Packing/Shipping:
FAQ
1.What's your MOQ?
At present we haven't strict policy for this, so welcome orders
with any quantity.
2. Are you a factory or trade company?
We are a manufacturer located in Hunan. You will be welcomed to
visit our factory or we also can share our factory vedio for you at
any time.
3. We are not professional for operation and installation of your
machine?
While it is not a stumbling block, our machine is easy to operate,
no need to professional training, and the instruction manual and
video sent to you are enough. What's more, we have professional
engineers and they can solve all questions.
4. How about packaging? If machine damaged, what should I do ?
Usually machine is packed with wooden case and standard export
carton, plywood carton or as your requirement. Damage haven't
happened before, if happen, we will arrange replacement.
5. We haven't do business before, how can I trust your company and
machine?
We are a factory with more than 13 years and without amy complaints
on . and our machine have exported to many countries and have a
good feedback.
6. If I want to visit your factory, is the traffic convenient ?
Our company traffic is very convenient, it is only 10 minutes by
car or taxi from our city light rail to our company, we also can
arrange the shuttle bus for you to our factory.
