High Performance Temperature Humidity Test Chamber Temp
Fluctudtiont:±0.5℃, 2.5KW~7KW
Product introduction
A temperature humidity test chamber is a piece of equipment used to
simulate different environmental conditions such as temperature and
humidity. It is commonly used in the manufacturing industry to test
the durability and reliability of various products under different
environmental conditions.
The chamber is designed to maintain a specific temperature and
humidity level, which can be programmed and controlled by the user.
The temperature and humidity can be set to different levels,
depending on the requirements of the test.
The chamber typically consists of a sealed chamber, a temperature
control system, and a humidity control system. The sealed chamber
is made of a durable material such as stainless steel or aluminum
and is insulated to prevent heat loss or gain.
The temperature control system consists of a heating and cooling
system that maintains the desired temperature level within the
chamber. The humidity control system consists of a humidifier and
dehumidifier that maintain the desired humidity level.
Some temperature humidity test chambers also have additional
features such as a programmable controller, data logging
capabilities, and alarms to alert the user if the temperature or
humidity levels deviate from the set parameters.
Features
High performance and quiet operation (65 dBa)
Space-saving footprint, designed for flush installation to wall
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone
plug(special requirement)
Three levels of overheat protection, plus overcool protection
Easy lift-off service panels, electrical access on left
Detachable eight-foot power cord with plug
Direct water supply connection for continuous operation (supply
tank optional)
ETL listed electrical panel conforming to UL 508A
StandardTest B: High temperature test method
GJB 150.3-1986 High temperature test
IEC68-2-2
Test B: dry heat. GB 11158 "High temperature test chamber technical
conditions"
GB10586-1 "Humidity and heat test chamber technical conditions"
GB/T 2423.2 "Basic Environmental test procedures for Electrical and
electronic products
Test B: high temperature test method".
GB/T 2423.3 "Basic environmental test procedures for Electrical and
electronic products
Test Ca: Constant humid heat test method". Wait for...
The test standard to which the machine meets
ASTM F2825:Standard Specification for Climate Stress of Single-Package
Shipping Packaging SystemsASTM D6944:Standard Practice for Determining Thermal Cycling Resistance of
Cured Coatings
ASTM D2126:Standard Test Method for Heat and Moisture Aging Response of Rigid
Foams
MIL-STD-810G:High and low temperature testing part;Damp heat
testing part
MIL-STD-202F: High and low temperature testing part;Damp heat
testing part
Model:
| (Model) | dry heat | B-T-120(A~E) | B-T-225(A~E) | B-T-504(A~E) | B-T-1000(A~E) |
| damp and hot | B-T-120(A~E) | B-T-225(A~E) | B-T-504(A~E) | B-T-1000(A~E) |
| Internal Dim | 45x60x45 | 60x75x50 | 70x90x80 | 100x100x100 |
| External Dim(W*H*D) | 75X189X110 | 90X177X130 | 100X180X103 | 130X190X123 |
| Relative Humidity | 20%~98%RH(10%~98%RH非标可选) |
| heat-up time | About3~5℃/min |
| Pull down time | About0.7~1℃/min |
| Temp Fluctudtiont | ±0.5℃ |
| Temp Uniformity | ±1.0℃ |
| Temp&Humi.Deviation | ±1.0℃/±3.0℃RH |
| Interior | SUS#304Stainless steel plate |
| Exterior | Coating or SUS#304Stainless steel plate |
| Power Source | AV:220V/380V 50/60Hz |
| power(KW) | 2KW~6.5KW | 2.5KW~7KW | 3KW~8KW | 4KW~10KW |
Our company:
FAQ
Q: What's the payment term?
A: T/T, L/C and other payment terms could be negotiated.
Q:Do you accept customization service?
A:Yes, of course, we can not only offer standard High and Low
Temperature Alternating Damp Heat Testing Chamber, but also
customized machines according to your request. Don't hesitate to
tell us your requirement, we will try our best to meet your needs.
Q:How about your warranty?
A:Generally, our warranty is one year. Within the warranty period,
we can offer technique support, Feedback to you within 24 hours and help you to repair your problem
controller freely, even it's not from our factory
Q:Can we visit your factory before order?
A:Yes, we warmly welcome and sincerely invite you or your team to
visit our factory, we will help to arrange hotel and pick up you
from airport.
